Upvc Windows And Doors Making Machine

About Upvc Windows And Doors Making Machine

CCM 5T CNC Corner Cleaner: Machine comes with 2,0mmgroove knives mounted on servo axis (2-Nos) for surface grooving, (1-Nos) TCT Milling Blade for back side cleaning, (1-Nos) track cleaning tool for sliding frames, (1-Nos) milling bit to clean the gasket place. Tool control by easy programming in tabular form or by machining codes for each profile which are saved to internal memory with memory capacity up to 150 programs.Frame support table for uniform cleaning of all corners.

Features and benefits:

  2 Axis 2 servo Motor controlled by a motion controller on ethernet protocol provides full interpolations with acceptance of standard G & M codes.

  Automatically grooves both top and bottom by means of cleaning knifes (2mm or .2mm).

  Both grooving knifes are programable as they are mounted on the axis which allows precise cleaning by means of programming in decimal scale.

  The internal track cleaner tool cleans both top and bottom side of tracks of sliding frames.

  Gasket cleaning bit cleans gasket place in all profiles.

  All inner and outer cleaning operations are carried out at a fastpace in one operating cycle.

  Wide range of outside shaped profiles can be cleaned along with slant and curve due to CNC controlledmilling blade.

  Up to 150 different programs slots available for multiple series of profiles.

  Profile cleaning Programs are directly created on the machine touch screen in tabular form with ease.

  10-inchDigital Touch display allows for 'tweaking' of the programs for optimum finish. Programs can be tweaked by qualified or trained machine operators.

  Full interpolation enables decorative shapes to be milled.

  Milling blade provides a superior finish due to more teeth and higher periphery speed when compared to conventional cutter sets.

  Total flexibility with full operation or option to isolate either or both grooveknives or milling blade

  Cleaning cycle gets activated automatically once theframe joint is inserted, centring device atomically pulls the profiles corners against the fences so that cleaning position remains accurate and precise.

  25mm-145 mm range height profiles could be cleaning in this machine.

Technical Data:

  Milling blade 250 mm dia. 5mm thick, 30mm bore

  Knife 2,0mm or .2mm.

  Mains voltage 3, 400-440v, 50Hz

  Milling spindle 2800 rpm

  Power output 1.4 kw

  Compressed air supply 6 bar minimum

  Air consumption 100ltr per cycle.

  Dimensions (Length, width, height) 1040x960x1560 mm.

  Weight 370 Kg.